Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX679 - Europe - (PPE+PA*)-MF - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL GTX™ Resin GTX679 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl GTX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Informations produit
NORYL GTX™ 679 resin is a conductive, mineral reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade is optimized to allow for primer-less electrostatic painting. NORYL GTX679 resin has improved impact / elongation, and the mineral content allows for the material to be used in structural applications such as metal and thermoset resin replacement. This material is available only in black.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 14 cm³/10min ISO 1133
Température 220 °C -
Charge 5 kg -
ASTM Data
Indice de fluidité, MFI 16 g/10min ASTM D 1238
Température 280 °C -
Charge 5 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 4790 MPa ISO 527
Contrainte d'écoulement 61 MPa ISO 527
Déformation au seuil d'écoulement 2 % ISO 527
Contrainte à la rupture 61 MPa ISO 527
Déformation à la rupture 5 % ISO 527
Module de flexion 4440 MPa ISO 178
Résistance au choc Charpy (entaillé), +23°C 3 kJ/m² ISO 179/1eA
Résistance au choc Izod (entaillé), +23°C, 4mm 4 kJ/m² ISO 180/1A
Résistance au choc Izod (entaillé), -30°C, 4mm 3 kJ/m² ISO 180/1A
ASTM Data
Module en traction 4450 MPa ASTM D 638
Module de traction d’élasticité 64 MPa ASTM D 638
Résistance de traction à la rupture 62 MPa ASTM D 638
Allongement d’élasticité 3 % ASTM D 638
Allongement à la rupture 4 % ASTM D 638
Module de flexion 4000 MPa ASTM D 790
Izod choc avec entaille, 1/8 in 39 J/m ASTM D 256
Izod choc avec entaille, bas température 31 J/m ASTM D 256
Température -30 °C -
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 0.45 MPa 184 °C ISO 75-1/-2
Température de ramolliss. Vicat, B 185 °C ISO 306
Température de ramolliss. Vicat, 120°C/h 50N 188 °C ISO 306
ASTM Data
DTUL à 66 psi 185 °C ASTM D 648
Vicat température 185 °C ASTM D 1525
Propriétés diversesValeurUnitéNorme du test
Absorption d'eau 3.6 % Sim. to ISO 62
Absorption d'humidité 0.7 % Sim. to ISO 62
Masse volumique 1240 kg/m³ ISO 1183
Densité 1240 kg/m³ ASTM D 792
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 95 - 105 °C -
Pré-séchage - temps 3 - 4 h -
L'humidité de traitement ≤0.07 % -
Température de la matière fondue 275 - 300 °C -
Température du moule 65 - 95 °C -
Zone 1 260 - 300 °C -
Zone 2 265 - 300 °C -
Zone 3 270 - 300 °C -
Vitesse de rotation de vis 20 - 100 rpm -
Contre-pression 0.3 - 1.4 MPa -
Caractéristiques
Transformation
Moulage par injection
Applications
Automobile
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.